Bezel and template for 1.8" TFT ST7735
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bezel for the ST7735
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 338
- Makes
- 0
- Views
- 1,310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I made this to contain a 1.8"TFT screen ST7735 and attach it to a project box which contained an Arduino. The template allowed me to precisely cut out the holes for the cables and the screws to hold it in place and then seal the main box from the bezel and the screen with hot glue. Obviously you don't need to print the template and it is overly thick.
This is quite a specific use but the bezel could be modified for other puposes or even made into a larger box so I've included the f3d file too.
The screen should push fit tight into the bezel.
You will need to cut a piece of clear plastic which needs to be exactly 2mm thick to cover the opening. The screen of the display will push up against this and hold it in position.
Clear plastic screen - max size 37.5 x 43.5-47
To attach the bezel I used knurled heat insert nuts.