Dedica Funnel with locking mechanism and 70 mm opening
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The funnel can be twist-locked onto the porta filter
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 1
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I wanted to have the funnel to lock onto the porta filter. I also wanted a 70 mm top opening (a little wider than the original model).
In PrusaSlicer 2.5.0: I needed to activate “External perimeters first” and change “Arachne” perimeter generator to “Classic” in order to get a smooth inner wall.
Other than that it is a simple print.
You don't need to activate supports as the support is part of the model. Simply break it of with a small flat head screw driver after printing finished.
Print in PETG with 0.4mm nozzle.
I chose 13% rectilinear infill, 4 perimeters and 5 top/bottom solid layers.