Small C Spanner 1/4 inch
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: quarter inch spanner_0.6n_0.3mm_PLA_MK3S_4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A miniature 1/4 inch spanner for holding lock nuts in place.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 87
- Makes
- 6
- Views
- 302
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed a miniature spanner to hold a lock nut in place when replacing the elements of a Dualit Original toaster. The instructions provided say use a 6.5 mm spanner which is not in my metric set. Fortunately a little bit of CAD and 4 minutes printing time with my Prusa and this a allowed me to complete the job with a ¼ inch socket to tighten the final nut.
The model is slightly over sized to allow for shrinkage. My spanner printed on a Prusa i3 mk3s measured 6.4 mm flat to flat on the C which fits easily over the ¼ inch brass nut (6.35 mm).
I printed the one in the photo in Prusament Galaxy Silver PLA.