1 / 1
Remix of Kinetic Sculpture to fit on Refrigerator with Magnets — image 1

Remix of Kinetic Sculpture to fit on Refrigerator with Magnets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Kinetic Sculpture Spinner Magnetically attached to Refrigerator

Rating
0 / 5
Likes
11
Downloads
70
Makes
0
Views
1,426
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution

I liked this Kinetic sculpture https://www.printables.com/model/289583-kinetic-sculpture , but didn't want to tape it to the wall & realized I could use magnets on the base & place it on the side of the Refrigerator.  I am using 10x2mm disc magnets & I knew the original design was too heavy for the magnets.  Since the author generously uploaded the step file, I set out to modify the design to cut down the weight.  I made a Org_Arm_Rnd_Long.stl, Org_Arm_Rnd_Medium.stl & Org_Arm_Rnd_Short.stl to match the connection on the hubs.  I printed 24 of the Org_Arm_Rnd_Short.stl file using the original parts of rest of the design with the exception of changing the base the hold magnets.  It was still too heavy.  I decreased the thickness of the arms by 2mm, which allowed me to change the thickness of the spring, hubs & top of base.  I also changed the spring from .8 to .9mm thickness & added some reinforcing at the dovetail joints as the 1st print broke at one of those joints.

I changed most of the tolerances to .2mm as my printer works better at those tolerances.  I used fusion 360 for most of these design changes.  I still had a problem with filing the cover to fit in the base, so I decided to use threads for that & openscad is my choice for any parts with threading.  Fusion 360 does not have an easy way to give tolerances to threading & openscad excels at this.  After testing some different threading, I used a non-standard M8 thread size for the cover & base.  The cover I changed to a simple hex nut to cut down on printing & seems to work well.  The tolerance I had between the threads was .3mm (Gap=.6 in openscad).

To print this Magnet Based design, print the following files.
1 - MagneticBase_8_25mmID__Rev4.stl
1 - Hub1s_Mod.stl
1 - Hub2s_Mod.stl
1 - SpringS1_Mod.stl
24 - Arm_Small.stl
or 12 of Arm_Small_2x.stl 
or 4 of Arm_Small_6x.stl
1 - CoverHexHead_7_65mmOD_Rev4.stl (for .3mm thread tolerance) (10 minute print or less)
or CoverHexHead_7_75mmOD_Rev4.stl (for .25mm thread tolerance)
or CoverHexHead_7_85mmOD_Rev4.stl (for .2mm thread tolerance)
or CoverHexHead_7_95mmOD_Rev4.stl (for .15mm thread tolerance)
or edit MagneticBaseCover_Rev4.scad to what you need.

If you use the openscad file you will also need to download the threads.scad from https://dkprojects.net/openscad-threads/ & place it in same folder as MagneticBaseCover_Rev4.scad

I included the required .stl files to print this along with the fusion 360 file of assembly (KineticS1_Assembly_Exploded v1 v5.f3d).  The assembly does not have the threaded base & cover, but style similar to original design.  I also included the rounded arms I modified to fit the original design if you want to use those (Arms_Long_Med_Short v5.f3d, Org_Arm_Rnd_Long.stl, Org_Arm_Rnd_Medium.stl & Org_Arm_Rnd_Short.stl).  This design can also work sitting on a flat metal plate like a steel picnic table, but not as well as hanging vertically.  The magnetic base has room for 25 of these magnets.  Think I left 6 of outside magnets out.

Here is a short video of it spinning attached to the Refrigerator.

Tags