Customizable Spare Parts Case +Box for Elegoo Neptune 2S (2/2D)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you've relocated your LCD why not fill the void with a parts case unlike any other!?
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 64
- Makes
- 0
- Views
- 968
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you've relocated your LCD why not fill the void with a parts case unlike any other!?
This initial design is just based on my own parts storage needs, I can take a couple suggestions and design some new slots if someone has ideas. There are templates that you can build on top of if you want to design your own slots. In the future I will design a tool holder, it will hang off the side of the LCD_Hole_Insert.
Everything can be printed with the same settings, some support is required but the settings I use generate the support only in require areas.
I printed in PLA+.
Cura Settings:
0.2mm Layer Height
0.39mm Line Width
2 Walls
Top/Bottom Layers 3
10% Infill or as needed
Generate Support with Support Overhang Angle at 87 grid pattern with 15% density so that only the required parts get support. If you need more then add as you like.
The USB support removes easy if you stab it with a small flat head driver and twist like they do in movies.
A short video, no explanation but you can see the case in full glory and action: