Wifi-Dose Lesekopf Hichi geändert
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.03 – €1.26 net (excluding VAT)
For file: Wifi-Dose Kabel v2_0.15mm_PETG_MK3S_1h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.15 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wifi Dos IR Lesekopf Hichi geändert um den ESP01 ausserhalb des Zählerschranks zu montieren.
- Rating
- 4 / 5
- Likes
- 1
- Downloads
- 85
- Makes
- 1
- Views
- 1,234
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gehäuse für den WIFI Lesekopf von Hichi geändert,
ich brauchte das Gehäuse um den ESP01 vom WIFI Lesekopf von Hichi
https://www.ebay.de/itm/314152997777?hash=item4924fa5391:g:a~MAAOSwk3xhfcKN
aus dem Zählerschrank zu montieren.
Die Box hat eine Kabelausführung mit der möglickeit das Kabel mit einen Kabelbinder zu befestigen.
Der Original Deckel passt, zu finden http://gofile.me/5OUBe/GWIBhz0cN
Druckt mit Devil Design PETG Black in 0,15 Quality mit 30% Infill, ohne Support.
Das Gehäuse für den ESP01 ist hier zu finden
https://www.printables.com/de/model/305303-esp01-box-esp01-gehause