1 / 1
12 Spline Bike Freewheel Removal Tool for 21mm socket — image 1

12 Spline Bike Freewheel Removal Tool for 21mm socket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of @Kiko64's freewheel remover modified to fit a 21mm socket. Fits 12 spline 22.6mm bicycle freewheels.

Rating
5 / 5
Likes
17
Downloads
230
Makes
1
Views
829
Reviews
1

Updated at source:

Model information

Category
Tools
License
GNU General Public License v2.0

I originally printed the source model but didn't have a 30mm socket to use with it.  I had to resort to using a adjustable crescent wrench.  Unfortunately the wrench just slipped as the plastic was elongating out the open end of the wrench.

This is just a simple remix to fit a 21mm socket (the largest I had).  It fixed the issue with the wrench slipping, and I was able to attach the socket to a breaker bar.  This was able to withstand a surprising amount of force, but it probably won't work if your freewheel is really stuck on.

Should be printed in 100% infill.  I printed lying down (in the provided orientation) for additional rotational strength.  This is because 3d printed objects tend to break along layer lines.  You will need minimal supports for that orientation (60° overhangs should be sufficient).

I've attached the OpenSCAD file used to remix the source model as well.  Requires downloading the source model into the same directory if you want to use it.

Tags