Ikea Lack Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.28 – €0.35 net (excluding VAT)
For file: screw_02mm_pla_mk3s_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.32 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 24.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I wanted a guide which worked without using screws. So I came up with this design.
- Rating
- 5 / 5
- Likes
- 98
- Downloads
- 452
- Makes
- 12
- Views
- 4,308
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I wanted a guide which worked without using screws. So I came up with this design.
You will need a hole saw with a diameter over 80mm and a wood drill with 12,5mm diameter.
Print instructions
No support needed.
0,2 layer height
100% infill