teardown small parts storage board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a board that i use when following repair howtos, e.g. by iFixit. The cubicles have a number impressed in the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a board that i use when following repair howtos, e.g. by iFixit. The cubicles have a number impressed in the left upper corner which can be used to correlate with the repair step. The cubicle are about 3cm x 3cm x 8mm which is convenient to put some screws inside. The whole part nearly 20cm x 20cm.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Resolution:
0.3mm
Infill:
20%
Filament:
Prusament PETG
Notes:
I used the default "Draft" profile in PrusaSlicer2.0 to speed up printing and accepted a non perfect surface. It took then 5 hours to print.
Category: Tool Holders & Boxes