Wheel for RC 1/10 Car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fully printable wheel for 1/10 scale model cars (12mm hex). (dimensions shown in the picture)
- Rating
- 0 / 5
- Likes
- 56
- Downloads
- 377
- Makes
- 0
- Views
- 1,545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a fully printable wheel for 1/10 scale model cars (12mm hex).
The wheel after printing is roughly 69mm in diameter and the tire is 3mm thick (low profile). I have included the other dimensions in the photo.
I used PLA in aluminum color to print the rim, while for the tire I used black TPU 40D.
For rim:
-Nozzle: 0.4mm
-Layer Height: 0.2mm
-Wall Line Count: 3
-Infill: Min 20%
-Support: Yes
For tire:
-Nozzle: 0.4mm
-Layer Height: 0.2mm
-Wall Line Count: 3-4(depends on how hard you want it)
-Infill: 0%
-Support: No
-IMPORTANT!: Top and bottom layers must be 6 or more (Otherwise, the outside of the tire will stick too weakly to the inside of the tire.)
In the future, I plan to make more types of tires and rims backward compatible with each other.
Enjoy printing.