DRV8825 stepper driver missing steps salmon skin torture test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is designed to make the missing steps issues on drv8825 stepper drivers more observable. If you're noticing…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
This model is designed to make the missing steps issues on drv8825 stepper drivers more observable. If you're noticing weird artifacts on your print and your printer is using drv8825 stepper drivers, chances are your printer is affected by the issue.
Video: https://goo.gl/UNGHVO
More details can be found here: https://cabristor.blogspot.my/2015/02/drv8825-missing-steps.html
I've "fixed" the issues by installing TL-Smoother, If you want to buy the ready-made diode boards that I've explained in the video/pictures, Link to buy TL-Smoother - https://goo.gl/MLxAy0 (updated: set of 4)
#SomeRandomThoughts
This is probably the first torture test designed to make the print looks bad. if your print looks bad, my design served it's purpose :P
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.25mm
Infill:
10%
Notes:
- Print speed 50mm/s
- Outer perimeter at 20mm/s or lower (if your slicer can't specific that, just drop the overall print speed to 25mm/s)
- 2 perimeters
- must be printed with the default orientation.
Category: 3D Printing Tests