1 / 4
Ozone generator box - laser cut
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lasercut ozone generator. Designed for 3mm plywood or MDF/HDF. Red - cut.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 66
- Makes
- 0
- Views
- 1,274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lasercut ozone generator.
Designed for 3mm plywood or MDF/HDF. Red - cut.
I made this device for servicing the room where I do laser cutting. The ozone generator helps me cope with the odors of formaldehydes, which are found in most adhesives used in plywood and MDF.
BOM:
- 1x Basic ozone generator unit: http://ali.pub/4gko3p
- 2x cheap 120mm PC case coolers
- 1x AC/DC converter to 12V. I've used PSU from broken wi-fi router.
- 1x power switch button IRS-101-3C3-R/B
- 8x fan mount screws
- 2x m4/m5 25mm screw & nut for generator mounting
power cord
BE AWARE! Ozone can be harmful in big concentrations!
Do not turn on the device for more than 15 minutes and always ventilate the room after using it. Do not allow people or animals to stay in the room when the generator is running.