Star Wars Reath Silas' Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightsaber of Jedi Padawan Reath Silas from Star Wars: The High Republic
- Rating
- 0 / 5
- Likes
- 67
- Downloads
- 221
- Makes
- 1
- Views
- 1,970
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
This is a recreation of the Lightsaber of Jedi Padawan Reath Silas from Star Wars: The High Republic.
It can hold a collapsing blade and a Lumintop EDC01 Flashlight. The blade is made up of 6 segments, each 18cm long, and it's about 85cm long fully extended. See this model for the blade.
The flashlight can be substituted for a printed dummy flashlight (lightsaber-dummy flashlight.stl).
The lightsaber is split into 12 pieces. You will need the colors black, gold, bronze, and grey.
| piece | color | layer height | supports | other settings |
|---|---|---|---|---|
| lightsaber-reath_top_black | black | 0.2mm | yes | - |
| lightsaber-reath_emitter_gold | gold | 0.2mm | yes | - |
| lightsaber-reath_top_button_grey | grey | 0.2mm | no | - |
| lightsaber-reath_top_gold | gold | 0.2mm | no | - |
| lightsaber-reath_middle_black | black | 0.2mm | no | - |
| lightsaber-reath_middle_bronze | bronze | 0.2mm | no | - |
| lightsaber-reath_middle_gold | gold | 0.2mm | no | - |
| lightsaber-reath_flashlight_holder_gold | gold | 0.2mm | no | - |
| lightsaber-reath_flashlight_screw_any | any | 0.1mm | no | spiral vase mode, no bottom layers, no brim |
| lightsaber-reath_cap_screw_any | any | 0.2mm | no | - |
| lightsaber-reath_end_cap_black | black | 0.2mm | yes | reduce overhang threshold to <45° |
| lightsaber-reath_cap_button_grey | grey | 0.2mm | no | - |
See the last render for how everything fits together. A purple arrow means that two pieces are glued together. A green arrow means that they slide or a screwed together without any glue.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
Update [2024-02-23] Added dummy flashlight