1 / 2
40mm Delta ARM mount, Parallel arm connector, fisheye effector connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tested on Flsun Q5. used to mount the arms to the effector or rails.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
print it flat on its back use high infill. I tested at 98% infill, Cubic printed from PLA+.
takes 2 m3 heat inserts. i used m3x3x5mm but slightly longer should work.