w212 Mercedes E class sunshade vent
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its plastic it breaks here's a 3d printed replacement
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 1,005
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Its plastic it breaks here's a 3d printed version that will save you at least 80 bucks goes together with m2 screws. Tested Works on my car. Put one piece on top of the sunshade and screw them together. Look at cad for how it goes together Tolerances are really loose so anyone can print it.
So far pla has held up to car temps though higher temp plastic recomended
cad ( vent is a offshoot version found in version history) https://cad.onshape.com/documents/6ca74d0dbe0de9c4e81ee5a4/w/b713e85bab7507393b744683/e/fe1296be5275d54250198c51?renderMode=0&uiState=63621770e8a4bf31da03dc95
UPDATE
Found after installing to get the vent pieces (not the handle) finicky to install both top and lower section just put in the lower section and its seems to clip in naturally and hold its position