Fast and material saving storage box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.13 net (excluding VAT)
For file: Deckel_0.2mm_PLA_MK3SMMU2S_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 8.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A relatively stable box that is optimized in terms of matrial costs and printing time
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 1
- Views
- 269
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A relatively stable box that is optimized in terms of matrial costs and printing time. The model is completely parameterized (except for the labeling, because Fusion360 does not support that). So you can choose the size freely without increasing the wall thickness when scaling and thus significantly increasing the printing time and material consumption. The 3mf models have a size of 30x30x30mm. The model should be printed in vase mode. Support structures are not needed and everything is optimized for a layer thickness of 0.2mm. So if you need quick packaging for a homemade advent calendar, these are very suitable.
Eine relativ stabile Box, die hinsichtlich Materialkosten und Druckzeit optimiert ist. Das Modell ist komplett Parametrisiert (bis auf die Beschriftung, weil Fusion360 das nicht unterstützt). Ihr könnt die größe also frei wählen, ohne die Wandstärke beim Skalieren zu erhöhen und die Druckzeit und den Materialverbrauch so Signifikant zu erhöhen. Die 3mf Modelle haben eine größe von 30x30x30mm. Das Modell sollte im Vase Modus gedruckt werden. Stützstrukturen werden nicht benötigt und alles ist für eine Schichtdicke von 0.2mm Optimiert. Falls ihr also für einen selbstgemachten Adventskalender schnell verpackungen braucht, sind diese hier sehr gut geeignet.