ESP 8266 mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small baseplate for using an ESP8266 together with a single screw sensor such as for Weatherstations,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 496
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a small baseplate for using an ESP8266 together with a single screw
sensor such as for Weatherstations, measuring current / voltage and so on.
The inner diameter of the screwholes is 1.8 mm. Any wood screw around 2 mm in
diameter with a length up to 12 or 15 mm should work fine. I have used Spax 2x12 screws with a PZ1 head. The four mounting post fit an ESP 8266 as well as those base adapters with voltage regulator and pin-outs (see pictures).
I printed the complete base plate with 100% infill which might be a bit overkill but worked fine.
OpenSCAD file is included. So feel free to add mounting posts as needed.
Category: DIY