1 / 1
Prusa MINI Z-motor cable protection — image 1

Prusa MINI Z-motor cable protection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a quick and dirty remix of argoroots smart "MK3 X-motor cable protection" print for the Prusa MINI Z-motor.

Rating
4.605 / 5
Likes
178
Downloads
1,007
Makes
42
Views
4,877
Reviews
38

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a quick and dirty remix of argoroots smart "MK3 X-motor cable protection" print for the Prusa MINI Z-motor. Not a neccessary upgrade but I wanted a consistend style and I didn't like the Z-motor cables beeing in a sharp bend at the most exposed point of the printer. No need to detach the connector. You can add a cable sleeve for better protection and style. Do not apply too much force to the cable tie.

Print instructions

Others mention it is to tight to fit (depending on material). Just scale it up by 1-2% and it should be fine!

Printed with

  • Prusament PETG Orange
  • 0.2mm layer height
  • 15-100% infill
  • flat side of the rectangle on the print bed with the protection pointing upwards
  • there is a 90° overhang, which will not print perfectly, but this is quick and dirty and it will be hidden by the cable tie