1 / 2
Parfocal ring for goldline / svbony telescope eyepiece — image 1
1 / 2

Parfocal ring for goldline / svbony telescope eyepiece

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Helps make all the eyepieces parfocal with each other. Fits all svbony goldline eyepieces: 20, 15, 9, 6

Rating
0 / 5
Likes
0
Downloads
35
Makes
0
Views
604
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

For my eyepieces I had to use the following spacer to reach parfocal:

  • 20mm - None
  • 15mm - Use 1.8mm spacer
  • 9mm - Use 2.0
  • 6mm - Use 2.2

I suggest printing all the sizes and take it with you on a clear night to test out. Takes a bit of trial and error, but not too hard.

I have two different versions, one with a pull tab and another as just a ring/sleeve. Pick whichever you prefer.

The ring is meant to be friction fit into the metal housing. You shouldn't need to force it in, but it's meant to be tight, not loose.

Printing tips:

  • Ensure you print in 0.1mm layer height between 1.5mm to 2.5mm height, otherwise the spacer won't be accurate (As in, 1.9mm spacer will be rounded down and printed as 1.8mm if you print in 0.2mm layer height).
  • Print a test piece to test fitment. Increase or decrease extrusion multiplier accordingly if it's too tight or too loose.

 

Tags