1 / 8
DEMAG Dampfkran - Gauge 1 / 1:32 /45 mm - RC controlled.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gauge 1 (1:32) 3D-printed fully RC controlled DEMAG railway steam crane.
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 819
- Makes
- 6
- Views
- 3,957
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my interpretation in gauge 1 (1:32) of a DEMAG railway steam crane. This 3D-printed model is fully RC controlled.

The original was build in 1927. It is currently in working order at the “Deutsche Dampflokomotiv Museum” in Neuenmarkt-Wirsberg - Germany (https://www.dampflokmuseum.de/das-museum/exponate/dampfdrehkran-selbstfahrend)

I’ve designed this model in Fusion360. It’s printed in PETG on a Artillery Sidewinder X2.
This is the (limited) bill of materials:
- 5 functions are RC controlled with a 6 channel RC receiver of your choice.
- Power is provided by a 18650 Li-ion rechargeable battery.
- Drive, rotation, hoist and boom are driven by GA12 N20 6V geared motors. Use 200 rpm for drive and 100 rpm or less for the other functions. AliExpress: “GA12 N20 geared motor 6v”
- The motors are driven by simple ESC's. AliExpress: “Micro 1A 5V DC Brushed Motor Speed Controller”
- A servo opens and closes the bucket. AliExpress: “SG90 servo”
- All axles are made of 3 mm metal, silver steel rod. (wheels andere gears for hoist and boom)
- Wheel axles rotate in 3.0x6.0x2.5 mm bearings. AliExpress: “3.0x6.0x2.5 mm bearing”
- A M8 bolt, a M8 nut, a washer and a spring fix the upper structure to the frame, allowing rotation while reducing play.
- This M8 bolt is one of the contacts to deliver power to the drive motor. The other contact is constructed with 1 mm wire fitted in the provided groove and an unknown coal brush salvaged from a DC motor.
- Metric screws/bolts (i.e. M2, M3, M4 and washers) are used to assemble all items. The threads are already modeled in published parts.
- Use CA-glue when items have to be glued.
- Add some weights (i.e. wheel balance weights or roofing lead) under the frame and in the back of the cabin lead to counterbalance the lifted load. To aid smooth operation of the bucket, some lead ballast to the bucket (on the top-bar and inside the clam-shells)