XY-3606 Buck Converter Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
XY-3606 Buck Converter Step Down Case **Updated 11/7/2022**
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 209
- Makes
- 0
- Views
- 775
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I made a little case for my XY-3606 DC Converter, the bottom is 2mm thick but in 3 places where solder joints are the largest, i have an extra 1mm of clearance to allow the board to sit flat in the box. You can secure with M3 screws
UPDATED 11/7/2022
I made some minor tweaks, i moved the screw mount holes a bit and made the walls 1mm wider for more strength. The lid screw hole is 3.125mm so an M3 screw slides through, i made the screw holes on the body from 2mm to 2.6mm so its a bit easier to screw into them. (If you want to screw all the way through, since the perimeter walls are a bit thicker, its easier to drill out the hole without breaking it to fit that m3 screw all the way through.