Woven Dresser Knobs
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.34 – €1.64 net (excluding VAT)
For file: Woven Knob_v1_short.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.49 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.9 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Variations of woven pattern knobs, perfect for furniture upgrades.
- Rating
- 0 / 5
- Likes
- 84
- Downloads
- 202
- Makes
- 1
- Views
- 776
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
There are a total of 4 knob variations, with two styles and two lengths of each style, that you can use to upgrade dressers, cabinets, and really any other furniture that has a knob. The first style has a slightly rounded woven pattern and the second style has a flat woven pattern.
All variations are designed for use with standard #8-32 screws. I've also included the original STEP files so you can easily edit the bolt size if need be.
Printing
I printed using PLA on the Prusa i3 MK3 with 0.1mm layer height and a 0.4mm nozzle. The details come out really well with those settings, but I did run into a couple failed prints since the layer height was so low, which is why the provided g-code only uses a 0.15mm layer height.
The STLs are included if you do want to re-slice and add more detail with a smaller nozzle and layer height. For supports, just select “support on build plate only”. I'd also recommend using variable layer height, with thicker layers on the stem and thinner layers on the knob. This can help speed up the print if the default time is too long.
Please like it if you do and leave any comments! If you're really feeling generous please consider buying me a coffee so I can keep creating!
Check out my TikTok!
Check out my YouTube!
If you like what you see, please consider joining my Patreon.