Dancing Coffin Dudes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dancing Coffin Dudes toy, not responsible for Astronomia ear worm.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 376
- Makes
- 1
- Views
- 5,788
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dancing Coffin Dudes toy, not responsible for Astronomia ear worm.
Print instructions
Case-Base.stl, need (1)
Case-Cover.stl, need (1)
Coffin.stl, need (1)
Dude-Body-with-Left-Peg.stl, need (3)
Dude-Body-with-Right-Peg.stl, need (3)
Dude-Hat.stl, need (6)
Dude-Head.stl, need (6)
Dude-Shirt-Insert.stl, need (6)
Dude-Sunglasses.stl, need (6)
Mechanism-Drag-Link.stl, need (2)
Mechanism-Front-Back.stl, need (1)
Mechanism-Left-Right.stl, need (1)
Mechanism-Lever.stl, need (4)
Mechanism-Spur.stl, need (2)
Hardware
M2.5 x 8mm, need (10)
Prep:
This was never intended to end up online, the parts are hastily thrown together, with no built-in tolerances, therefore parts will need trimming & sanding prior to assembly - and probably even more during so, too.
Installation:
1.) Start with the case, drop-in Mechanism-Left-Right
2.) Drop-in Mechanism-Front-Back
3.) Install 4x Levers, 2x Spur gears, & 2x Drag Links
4.) Secure with 6x M2.5 x 8mm screws
5.) Install Cover, with 4x M2.5 x 8mm screws
6.) Assemble the Dudes and install them to the base
7.) Cap it off with the coffin. No glue here, just push-fit