C5 Corvette Under Hood Light Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement lens for the 1997 - 2004 C5 Corvette under hood light.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This is a replacement lens for the 1997 - 2004 C5 Corvette under hood light.
It is not an exact replacement, but it fits fine. It prints in a couple hours.
Went through a few revisions before getting it perfect. Version 3 is now uploaded with 1 and 2 deleted.
Version 2 seemed to fit fine but it came off. It may have been due to it being too hot under the hood for PETG.
Version 3 the tabs are .1mm thinner and .1mm shorter. This one was printed using PolyLite Transparent Poly Carbonate. Took it out for a 30 mile drive today and it was still attached when I got back. This one is the keeper.
Hope this helps someone else.
Small history:
11/6 - version 2 uploaded. It has thin holes instead of through holes. Cleaned up the edges a bit too. It may not be as bright, but it is more waterproof and adding the mylar is not needed.
11/19 - Version 3 uploaded. Version 1 and 2 removed.
Print Settings
Printer:
Tenlog TL-D3 Pro
Rafts: Yes
Supports: Yes
Resolution: .2
Infill: 99
Filament brand: Inland
Filament color: Transparent
Filament material: PolyLite PC
Notes:
Supports are only needed for the tabs. I did not try to print without. It may work, not sure.
This should print on an Ender 3 pro also.
Printing spec's for the PolyLite PC filament:
Plate Temperature
90C - 105C
Extruder Temperature
250C - 270C