2.5D Cube Puzzle FabLab
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Idea taken from https://thingiverse.com/thing:2469830 Done with inkscape and https://github.com/fablabnbg/inkscape-…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Idea taken from https://thingiverse.com/thing:2469830
Done with inkscape and https://github.com/fablabnbg/inkscape-paths2openscad/releases
The gap is set to 0.2mm, which is wide so that most printers will produce a loose fit. You can easily accomodate by adjusting the extruder flow to 110% or 120% -- 120% gives me a very strong fit requiring a sturdy workbench and applying my body weight to assemble.
Warning: Do not try to solve the puzzle from looking at the photos. To keep up the challenge, the pieces in the photos show a similar but confusingly different design. Sorry :-)
Category: Puzzles