Raspberry Pi4 Case integrated with RMU Brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi4 Case integrated into a brace on the Wedge-Group RMU-Mk3 mounted on the frame of a Prusa MK3S+
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use OctoPrint with a Raspberry Pi4 I already had. I started with the pi4 case from this project https://www.printables.com/model/58012-raspberry-pi4-case-for-prusa-mk3s-with-dsi-opening. Soon, however, I added the MMU2S unit and also bought a Wedge-Group RMU-Mk3 filament buffer system. The brace on the RMU used the same mounting hole on the MK3S+ frame so it displaced my pi4 case.
This set me on a journey of finding another location for the Raspberry Pi4 case. This model was one of the stops on the journey. I took the original case mount (above) and integrated it into the RMU brace that attaches to the MK3S+ frame.
This case puts the top (end) of the pi4 at approx. 20mm (0.79in) above the top frame of the MK3S+.
More details on the hardware used for placing the pi4 in the case can be found at the base project linked above.
Another stop on my journey was a case with a mount to clip to the top of the MK3S+. That model can be found here: https://www.printables.com/model/311213-raspberry-pi4-case-with-frame-clip-for-prusa-mk3s