Noctua A4 mount for Revo Micro (cr) hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two part mount for a Noctua A4 (40x40) fan. Straight and tilted version.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After some issues with the little stock fan (besides the noise), I decided to design a 2 part mount for a Noctua A4 (40x40) fan. Besides the straight version, I also made a tilted one to mount a 20mm thick fan without colliding with the frame of my Ender 5.
Print the parts as shown in the picture (I added a support blocker to the funnel) and glue them together. I printed it with ASA, 100% infill, brim and support.
Just click the mount on the heat sink and make sure that the top is flush with the top of the heat sink. I used 3.5 screws to mount the Noctua fan.