LM8UU Spacer for Z Axis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It was recommended that there should be a space in between 2 of the bearings on both left n right Z axis.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 94
- Makes
- 0
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
It was recommended that there should be a space in between 2 of the bearings on both left n right Z axis.
As many know that the fitting is super tight, and therefore its a lot of work just to make a space in between.
So i decided create a spacer.
I measure ID of the bearing to be 8.4mm and the OD to be 15.0mm.
I drew a simple design with 0.2mm smaller OD to make sure the fitting won't be to tight when installing.
I believed this should come as a printed part of the MK3s package. And why no one thought of it as its been soo long since the MK3s was launched?
I just took mine out of the storage to assemble after keeping it in box for almost 3 years. And thought that something simple like this would have been picked up by the community.
Print instructions
0.2 layer height
3 walls
20% infill
5 top and bottom layers