12864 Mini Display Adapter for TwoTrees Sapphire Pro SP3 Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.51 – €1.85 net (excluding VAT)
For file: 12684_SP3_Displaycutout_0.2mm_PLA_MINI_1h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.68 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.63 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter Bracket to use a 12864 Mini Display on a TwoTrees Sapphire Pro SP3 Case instead of the original MKS Robin TFT35
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 55
- Makes
- 0
- Views
- 705
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Adapter to replace a Makerbase Robin TFT35 V1.0 as found in TwoTrees Sapphire Pro SP3 and other printers with a FySetc, BigTreeTech or Makerbase Mini 12864 Display.
Also compatible with the Voron STM32-Mini USB-Adapter ( https://github.com/VoronDesign/Voron-Hardware/tree/master/STM32_Mini12864/) , as long as you use the slimmed rear case of LMaker (added in this project)
This means, you can either use any kind of 3d printer controller, which uses EXP1 / EXP2 cabling or connect it via USB to a Raspberry Pi or other Linux systems.
So, you can go fully on original Marlin code or Klipper :-)