Chladvac - A beer bottle thermal isolation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bottle cover that keeps your beer cooler for a bit longer if you want to drink it later. The walls are about 10mm.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 91
- Makes
- 0
- Views
- 837
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
A bottle cover that keeps your beer cooler for a bit longer if you want to drink it later. The walls are about 10mm.
Bottles differ a lot so this one fits to most Czech beers, some German too but no guarantee. The bottle used for the design is shown in the pictures.
There's also a lid, which is pretty cool and recommend to print it too, if you don't want flies and wasps in your drink.
Be careful with the print settings, read the instruction or message me for some info.
Print instructions
threads need to be printed with good resolution the rest 0.3 no problem.
No infill, only for the handle I recommend to put modifier to add infill (15% honeycomb) and 5%honeycomb at the bottom part at the bottom of it, otherwise it's not possible to print.
G-codes consist of all modifiers and should be easy to print. The 3mf files consist of the necessary settings.
If you want to print faster, 160% works too I would slow it down when around the thread area, though.