Retractable Remote System | Never Lose A Remote Again
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.53 – €1.87 net (excluding VAT)
For file: Remote Dock_2 Remotes.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.70 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A retractable remote system so you never lose your remotes again!
- Rating
- 4.667 / 5
- Likes
- 81
- Downloads
- 168
- Makes
- 3
- Views
- 2,392
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
Are you tired of losing your remote? Or worse losing them in the couch cushion? It's going to find a way there anyways so why not lean into it? That's why I've created a retractable system so they're in one place and easy to access. This system slides under your couch cushions to use as an anchor.
You will need badge reels that you can find cheap on Amazon for this build.
I've provided different options for 1 or 2 remotes as well as middle or side cushions.
Since you will need a way to connect your remote to the badge reels, I have created some of the top remotes to get you started. Happy to help create cases with loops if you provide the link to the case specific to your remote.
- Amazon Fire Stick Remote
- Apple TV Gen 1
- Apple TV Gen 2 and 3
Printing
Base Plate
- Supports Recommended for Hook portion
- Wall Line Count: 4
- Infill: 10%
Cases
- Print upright
- Minimal Support Needed (Set to Everything Touching the build plate)
- Wall Line Count: 4
- Infill: 10%
Orientation
