1 / 1
Hinged Dual Asthma Inhaler Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinged case for two asthma inhalers.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 65
- Makes
- 1
- Views
- 591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Gracro's “Dual Asthma Inhaler Case”, with added hinges from brass_ring's “Spring Latch Modular Ammo Box”.
I made the magnet compartments internal to prevent the magnets from falling out, so the print must be paused at the appropriate layer height to drop the magnets in. The magnet dimensions are the same as the original model (4x10x10 mm).
The case can be printed without supports. Infill should be at 20-25% due to the strength of the magnets.