1 / 4
Parametric Under Table/Wall Mount (f3d file)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric under table or wall mount for any device.
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 51
- Makes
- 0
- Views
- 324
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Fusion 360 is required for parametric modeling. This can be adjusted to fit about any rectangular device that the depth or width isnt less than 55 mm and the height isnt less than 15 mm. Devices can be unmounted by simply pulling on the tab, no need to unscrew the mount.
The design has only three parameters that need to be adjusted, this would be the exact measurements from end to end of the device:
- Inside_Depth, distance that has the open tab.
- Inside_Width
- Inside_Height
- Tolerance, this can be adjusted if the fit for the device is too tight or too loose, up to 0.5 mm.
Printing
Atleast 3 walls and 35% infill, no support needed.
Hardware
- x3 #6 tapered screws