Connectable Vase mode Hex-Boxes with Lids
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.35 – €1.65 net (excluding VAT)
For file: HexBox_100Wx50H_0.2mm_PLA_MINI_1h32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.50 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.53 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These are hexagonal shaped storage boxes with lids that can be connected together. Can be printed vase mode.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 137
- Makes
- 1
- Views
- 606
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I really like the model by “Matt C" but I didn't want there to be any way material from one box could fall into the next one over through the connectors. I also didn't want to have tabs sticking out on the exterior edges that weren't being connected to the next box over so I remixed them into these ones and added friction fit lids. They are parameterized and I have included the Fusion360 file for you to play with should you wish specific dimensions.
They are made to be printed vase mode with a 0.6mm line width. They should work in normal mode as well so long as you have a 0.6mm line width. Any other line width and the tolerances probably won't work. If you find the connectors too tight or too loose I suggest scaling the x and y directions a bit leaving the z direction alone. The current stl for the connectors has a nice friction fit when printing on my prusa mini.
Enjoy