1 / 4
Feeler Gauge Handles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handles for embedding a range of feeler gauge sizes, .15 mm to .25 mm, that I've found useful for bed tramming.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 1
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Slice with 0.28 mm layer height and 0.6 mm line width. This will work with either a 0.4 or 0.6 mm nozzle. 1.2 mm wall (2 wall lines). Add a pause at layer 11 to allow placing the gauge. A bit of tape helps keep the gauge in place for the covering layer.
Zero top and bottom layers. Infill density 97% with Lines pattern. In Cura set line directions to (45,90,-45,0) to ease covering the gauge. I don't know how to do this in other slicers.