Apple Watch Ultra Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Aiirik's model for a better path for the wire, plus enhanced edge in front to better maintain the Apple Watch.
- Rating
- 4.788 / 5
- Likes
- 250
- Downloads
- 2,577
- Makes
- 35
- Views
- 8,531
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 11.15.2023: I added a new version which is “open” on top, to ease the insertion and removal of the charger. Looking at some of your comments, the “closed” version can be too tight depending on the material, printer...
When I printed the model from Aiirik, the charger didn't stayed inside the hole, popping on top because of the constraint on the wire. Therefore I decided to redesign this stand from scratch to prevent this issue, and also to improve the edge in front to better match and maintain the Apple Watch (I feel it more secure :-)).
I used the model from Peterson to better position the watch and follow its shape for the edge.
Fusion 360 and STEP files are included to allow remix culture :-), or if someone wants to remix or adjust the depth of the hole to fit with old metal chargers which are a bit thicker than the one coming with this watch.
Print instructions
- Standard .2mm quality layers
- PLA filament
- No brim
- I printed mine without any support, but feel free to add on the top overhang
Important for the "closed" version
Works with a MK3S+ as is (just a blow of cutter on top of the hole because of quality of the overhanging).
If you face problems inserting the charger (especially with aftermarket ones, or based on your printer capability), you can slightly upscale the model to increase the size of the hole.