Featherstick Line Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.88 – €1.08 net (excluding VAT)
For file: Featherstick Line Holder with mark_0.6n_0.3mm_PETG_MK3S_46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.98 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 45.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Used for 1" feather sticks to help secure any loose rope you may have, I use it on my EWO one stick.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 79
- Makes
- 0
- Views
- 919
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for a 1" feather stick, similar to what you receive when you purchase an EWO one stick. Its used to help secure the amsteel rope that is used to attach you to the tree when one sticking. The same rope that goes through the cam cleat.
Print it in PETG or ASA. 2-3 perimeters minimum and 15% or so infill should work. Don't need to go overboard because it does need to be flexible enough to get onto the feather stick.
I purchased some cheap 1/8" bungee from amazon and tied it through as a loop.
https://www.amazon.com/gp/product/B09NPY5L5J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1