1 / 2
BTT EBB42 Toolboard BondTech LGX Lightweight Direct Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight mount of EBB42 tool board for bondtech LGX
- Rating
- 4.667 / 5
- Likes
- 66
- Downloads
- 584
- Makes
- 3
- Views
- 3,207
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part.
BOM
- 1 x Bondtech LGX
- 1 x BTT EBB42
- 4 x Male-Female Standoff M3 screws (these come with the LGX, but not installed by default)
- 4 x M3 x 8 screws for mounting
- Tipties for cable management
If you are having issues connecting your hot end heater cartridge to the toolboard, either use tweezers, or insert and tighten the ferrules/wires before screwing the toolboard + mount to the LGX.