Split Cup Molds
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Molds for creating silicone split cups for "dirty pour molds"
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 133
- Makes
- 0
- Views
- 966
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
Molds for creating silicone split cups for resin art. Printing with 3 walls and 25% infill allowed me to put these into a pressure pot at 40 psi to create bubble free silicone cups using SmoothOn DragonSkin 20.
To use print, coat the internal pieces with your choice of mold release agent (I used Vaseline). Assemble the sides to one of the Bottom. Mix up a 2 part silicone and pour through the central top facing hole. Agitate to remove internal bubbles, and then if desired put into a pressure pot until cure time is completed. If you properly coated in a release agent the cups should come apart fairly easy.