1 / 4
Bosch GKS 18V-57 to FSN Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate to use Bosch GKS 18V-57 with a guiderail
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 704
- Makes
- 1
- Views
- 3,885
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This adapter fits on the Bosch GKS 18V-57 circular saw. It slides over the back and then attaches with a screw on the front. So it won't come of the saw.
If you wan't to use the screw on the front of the saw to attach the adapter you need to install a M5 threaded insert to the print. If you dont't have one you could leave it out. Then the adapter is just a slide on.
This plate rises the saw 4mm above the guiderail.
As this part is bigger than 20cm I uploaded two versions. One single file to use on larger printers and two seperated files for smaller ones.