Stringing test (fast and cheap)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.14 – €0.17 net (excluding VAT)
For file: OozingTest_PETG_MK3S_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Quick stringing/oozing test without lots of material and time wasted.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 97
- Makes
- 2
- Views
- 339
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
Quick to print and very cheap while having proper bed adhesion and a stringing distance of about 100mm.
Note:
If slicer settings like extrusion multiplier or temperature changes don't seem to change much, try using fresh filament or dry your current spool, as wet filament (even when printing with PLA or PETG) can cause severe stringing issues.