1 / 3
Voron 2.4R1 XT60 Skirt Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An XT60 Connector Mount for installation into the Skirts of a Voron V2.4R1.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 151
- Makes
- 1
- Views
- 920
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Voron 2.4R1 XT60 Skirts Mount to passthrough juice for externally mounted hardware like an ERCF using an ERCF-Easy-Brd. May also work with the R2 and/or the Trident ( depends on the size of the Skirts Hexagonal Holes ).
BOM:
- The two 3D printed Halves ( needs to be separated in the Slicer )
- 1x Amass XT60 Connector ( the ones with the cover in the back )
- 2-4x M2x10mm Screws ( Socket or Round Head Screw )
Installation:
- Solder the Wires to the Male XT60 Connector Plug.
- Create a Sandwich with the two halves of the Mount with the Connector and the Skirt between them.
- From the inside - Screw the two halves together using 2-4x M2x10mm Screws.
- Profit!