1 / 2
Kraft Paper Holder Roll
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses 3/4” sheet for the base, 1/4 machine nuts/bolts, 7/8” dowel — and some tape to fine-tune clearances.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 181
- Makes
- 0
- Views
- 1,512
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Uses 3/4” sheet for the base, 1/4 machine nuts/bolts, 7/8” dowel — and some tape to fine-tune clearances.
The foot is designed to print with TPU (1” forstner bit to counter-sink), although not really required. If you have a 1/4 button head (round) machine screw your can just counter sink it on the bottom and it will be fine.