Top cover for 50mm x 50mm Parking Post
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this as a replacement top cover for a Deuba Parking Post (50mm x 50mm - wall thickness: approx. 3.4mm).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
The top covers of my Deuba Parking Posts (50mm x 50mm - wall thickness: approx. 3.4mm) were already damaged when I received them. There was no way to get the top covers as spare parts. So I made my own version.
Here you can find all necessary details about the Deuba Parking Posts at Amazon including dimensions.
This top cover is a snap fit and does not require any screws. Just remove the original top cover (if you still have it) and replace it with this one. On the first installation it will require quite some force to mount it onto the post, but this also means, that some kiddies cannot simply remove it.
I printed mine with transluscent red PETG and it matches the color of the red stripes quite well.
Print settings:
- Filament: PETG (or better)
- Nozzle: 0.4mm
- Layer height: 0.3mm
- 4 bottom and 4 top layers
- Wall line width: 0.5mm
- Infill line width: 0.6mm
- Infill: 24%
All brandnames and trademarks are trademarks or registered trademarks of their respective owners.