1 / 1
Drill guide for shelf pins
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For making 3x 5mm pin hole in 50mm spacing. Requires center drill and try-square.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 79
- Makes
- 0
- Views
- 743
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
3x 5mm pin hole in 50mm spacing.
Requires center drill and try-square.
Center drill outer diameter 8mm - drill bit 5mm.
Try-square's plate dimensions 24.8x2mm
For assembly 6xM3 nuts and bolts + 2xM3 nut and bolt for plate fixing
Printed with anycubic mega: layer height 0.2, nozzle 0.4, PLA.
Supports needed under hex nut holes.