Hole 1 - Mini Golf Course
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the 1st of 9 Holes of my Mini Golf Course.
- Rating
- 4 / 5
- Likes
- 258
- Downloads
- 1,213
- Makes
- 2
- Views
- 10,081
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the 1st of 9 Holes of my Mini Golf Course.
I made this video of the Hole 1 so you can see how it works:
https://www.youtube.com/watch?v=paLyoNTc0Zk
This hole is designed:
- to be printed in one part (fits in diagonal 240x240 mmm).
- to be played with a single stroke.
to be printed without supports.
I made three different intensities for the teebox, start with the medium and see if you need harder or softer. You can also find two "ball" designs one for fff printers and another one for sla printers.
Print instructions
I made three different intensities for the teebox, start with the medium and see if you need harder or softer. You can also find two "ball" designs one for fff printers and another one for sla printers.
1) The most important advice I can give you is to let the "teebox" cool down correctly when you print it. The part contains a spiral spring and if you don't let it cool the spring won't work.
2) NO SUPPORTS, with 0,2 layer height and 10-20% infill (you can also use other settings, those are the ones I used and they worked fine). It should take between 8-10h to print.
3) PLA not PET, there are a lot of overhangs in the designs so I don't recommend using PET.
If you like the design please leave a like and if you have any problem with the design, printing settings, etc. feel free to leave a comment or send me a DM. Thanks for your help.
Happy printing;)