1 / 1
SR200 Barrel Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This part holds the breech end of the barrel in the receiver of the SR200.
This file is being provided to the community to allow designers to adapt barrels of different makes for use with the SR200. If you chose to design this adapter around a barrel with a chamber that has a smaller inner diameter than the stock barrel you will need to deign the barrel adapter to seal against the breech o-ring. When redesigning this part for adaptation with other barrels I would suggest lengthening it to give more room to seal your new barrel in place either with inset o-rings or glue.