1 / 5
Taller MK52 heatbed cable cover at 60°
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Taller bed cover for total of 8.5 mm internal height clearance
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 64
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This MK52 heated bed cover has ~9 mm of internal height to accomodate bulkier terminals
What's different?
- Added 3.6 mm of height to @cdassei (thing:4711069 on thingiverse) model from https://www.thingiverse.com/thing:4711069?part=79aec1b8-0ce1-48c9-9068-8cb24c950cf7
Here on printables, @mikrom has a similar model
Hardware:
- 3x M3x20 mm countersunk screws
- 3x M3 nylock nuts
Assembly tips:
- After attaching the cover top to the bed using the retaining screw, I found it helpful to clamp it in-place before screwing in the other two fasteners.
