1 / 2
Liter of Ryzen (Deskmini x300 Ultraslim, .9L)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Deskmini, but 50% smaller. (1.9L ---> .9L)
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 411
- Makes
- 0
- Views
- 4,327
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For when the 1.2L 3d case isn't small enough.
Important information and disclaimer (read):
- It only works with Deskmini x300 and the ID-Cooling IS-30. It will not be compatible with anything else.
- The IS-30 is not perfectly compatible with the Deskmini so the assembly must be done with care. The VRM heatsink has to be unscrewed and repositioned outwards by 1mm. After this, the cooler can be mounted but the cpu bracket won't be able to seat in the board holes. It can still be screwed in to create enough mounting pressure, but don't damage the board by screwing in the bracket too far. You have now been warned and proceed at your own risk. I am not responsible for damage.
- It's fragile. Not intended to be durable. Mostly for the fun of making nearly the smallest AM4 desktop possible.
Parts list:
-4x m3 screw (between 10mm-20mm length)
-16mm switch (same style as the Desknano project)
Print instructions:
Print inverted. Slower speed suggested. Supports optional.
Pictures of a similar version of the case in action are here: