Ducted QIDI X-Plus X-Max Top Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of humebeam's top cover to allow for hookup of 4" ducting.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
V2 has been added to make it a modular system. I also wanted the ability to use this with other systems, such as venting my airbrush spray booth.
This is a simple remix of humebeam's top cover modified to allow hooking up a 4" dryer duct to vent fumes to a destination of your choice. In my case, I'm venting out a basement casement window using my adapter; https://www.printables.com/model/315705-4-ducting-adapter
2/18/23 Updated to a magnetic modular system. This improved version uses 8x3 magnets that are pressed into place to allow you to use multiple accessories on the hood plate. The casement window will be updated by EOM.
- Supports:
- Yes for the ‘QIDI X-Plus X-Max Top Cover Duct’; however, you can place support blockers for the magnet holes.
- Resolution: .16-.2mm, but I printed at .24 with no issues.
- Infill: 20-25%